CARA RESET PRINTER CANON E510/E500 ERROR

Reset Printer E510 / E500.
- Before we reset using the software, we must first make the printer go into Service Mode. 

As do the following:
1. Turn off the printer by pressing the POWER ON button. Do not unplug the power cable
2. Press and hold the STOP / RESET followed by pressing the POWER ON button. So both the depressed position.
3. Release the STOP / RESET button but hold the POWER ON button, POWER ON dalam situation is still depressed, press the STOP / RESET 6 times.
4. Then release both buttons simultaneously, the printer will be in Service Mode.
5. The computer will detect the new hardware. Ignore it.

Download Reset-er Via MediaFire ServiceTool.v.3400

How to Reset Printer Canon E510 / E500 Error

1. Prepare a few sheets of paper in the printer.
2. Run ServiceTool.v.3400
3. On the menu Clear Ink Counter select Main-Black and then Test Print.
- The printer will print one sheet
4. On the menu Ink Absorber Counter select Main-Color and then Test Print.
- The printer will print one sheet
5. Click EEPROM.
- The printer will print one sheet (if it cannot, ignore it & direct to Step 7)
6. Select auto print and then start printing a test page print wait until all of the menu is complete.
7. Turn off the printer and ready to use your Printer.

Hopefully Helpful .:)
#CopyPaste